The JL Industries Ambassador 1013F10 is a surface-mount steel fire extinguisher cabinet for a 10 lb extinguisher, made in the USA. The whole cabinet mounts on the wall face, so there is no wall opening to cut: it suits masonry, tilt-up, thin partitions, and any wall you cannot open up. The full-view clear acrylic door shows the extinguisher at a glance and swings on a continuous hinge that opens 180 degrees, with a zinc-plated pull handle and roller catch.
Specifications
| Model | Ambassador 1013F10 |
| Mounting | Surface mount, square edge, no wall opening |
| Fits extinguisher | 2.5 to 10 lb (see compatibility below) |
| Cabinet (W×H×D) | 13-11/16 in × 27-3/16 in × 6-1/2 in |
| Trim, outside (W×H) | 13-7/8 in × 27-3/8 in |
| Material / finish | Cold-rolled steel, white powder coat |
| Door | Full-view clear acrylic glazing, pull handle, 180° continuous hinge |
| Fire rating | Non-rated |
| ADA projection | Projects more than 4 in, over the ADA protrusion limit |
| Weight | 18 lb |
| Country of Origin | USA |
A note on ADA placement
A surface-mount cabinet projects its full depth from the wall, which is more than the 4 in protrusion limit ADA sets along accessible circulation paths. That makes this model the choice for walls where projection is acceptable, and the wrong one for accessible corridors and circulation paths; use a recessed or semi-recessed cabinet there, like the Ambassador 1017V10 we also carry.
Extinguisher compatibility
JL's fit matrix rates this cabinet for standard 2.5 to 10 lb dry-chemical extinguishers, with wider-bodied clean-agent units to 5 lb and 5 lb CO2. Fit is set by the extinguisher's cylinder diameter against the cabinet depth, not by weight. Confirm the cylinder diameter on your extinguisher's cut sheet against the dimensions above. See our Fire Extinguisher Cabinet Selection Guide for the full fit matrix.
Placement and mounting height follow the NFPA 10 requirements.
Model cross-reference
The same 10 lb Ambassador family also comes recessed and semi-recessed (1014 trimless, 1015 flat, 1016 square, 1017 rolled; we carry the 1016V10 and 1017V10), plus a surface-mount rolled-edge version (1019). Door styles, glazing, colors, and a fire-rated build are factory options. For an exact configuration match, request a quote from this page.
Documents and downloads
For specification and installation: the manufacturer's Ambassador 1013F10 submittal (PDF). Need a project-specific submittal filled out? Send us the project details with a quote request.