{"title":"Fire Alarm Protection","description":"\u003cp\u003eProtective covers and accessories for manual fire alarm pull stations. Pull stations sit at exits and in paths of egress where they are easy to reach, which is also where they are easiest to bump, tamper with, or trip on purpose. A cover keeps the station visible and usable while adding a deliberate second action before the alarm can be pulled.\u003c\/p\u003e\n\u003ch3\u003eWhere covers earn their keep\u003c\/h3\u003e\n\u003cp\u003eSchools, gyms, dormitories, correctional and behavioral-health facilities, warehouses, and loading areas see the most nuisance activations and the most accidental impact damage. A cover does not change how the alarm system is designed or inspected. It protects the device.\u003c\/p\u003e\n\u003ch3\u003eChoose by mounting\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSurface-mount\u003c\/strong\u003e covers bolt over the existing station and need no wall work, which suits retrofits and masonry walls. \u003cstrong\u003eRecessed\u003c\/strong\u003e covers sit flush where the station is set into the wall. Confirm the cover matches your pull station footprint before ordering.\u003c\/p\u003e\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003cp\u003eGasketed versions seal against dust and washdown in kitchens, shops, and exterior-adjacent areas. Breaker-bar and break-panel versions add a physical barrier for locations with repeat malicious activations. Replacement acrylic panels, gaskets, and breaker bars are stocked as parts.\u003c\/p\u003e\n\u003ch3\u003eRelated\u003c\/h3\u003e\n\u003cp\u003ePull station placement, spacing, and inspection intervals are set by \u003ca href=\"\/resources\/building-codes-standards\/emergency-life-safety\/nfpa-72\"\u003eNFPA 72\u003c\/a\u003e and your local fire code. A cover is an accessory and is not a substitute for any requirement in that standard. For portable protection at the same stations, see our \u003ca href=\"\/safety\/fire-extinguishers\"\u003efire extinguishers\u003c\/a\u003e and \u003ca href=\"\/safety\/fire-extinguishers\/cabinets\"\u003efire extinguisher cabinets\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"cato-surface-mount-fire-alarm-pull-station-cover-clear-220-s","title":"Cato Surface Mount Fire Alarm Pull Station Cover Clear 220-S","description":"\u003cp\u003eThe Cato ALC22011, previously catalogued as the 220-S, is a surface mount protective cover for a manual fire alarm pull station. A clear cover sits over a red backbox, so the station underneath stays visible and readable while gaining a deliberate second action before it can be pulled. The cover is labeled PULL TO OPEN across the lift tab and carries vertical FIRE lettering on the side, and the pull handle is designed to ADA specifications.\u003c\/p\u003e\n\u003ch3\u003eWhy a cover\u003c\/h3\u003e\n\u003cp\u003ePull stations are mounted at exits and along paths of egress where they are easy to reach, which is also where they get bumped by carts and equipment, tampered with, or pulled on purpose. Schools, gyms, dormitories, correctional and behavioral-health facilities, and warehouses see this most. A cover protects the device. It does not change how the alarm system is designed, installed, or inspected.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eALC22011 (previously 220-S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eProtective cover for manual pull station\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlarm mounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSurface mounted alarm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOpening method\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePull to open\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCover inside (W×H×D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6-1\/2 in × 7-1\/2 in × 3-1\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCover outside (W×H×D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7-1\/2 in × 8-1\/4 in × 3-3\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBody material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInjection molded high-density polypropylene, red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCover material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInjection molded copolymer polypropylene, clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHandle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDesigned to ADA specifications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated options and parts\u003c\/h3\u003e\n\u003cp\u003eThe series also includes a recessed pull-to-open cover (ALC22001, previously 220-R) and secured break-bar versions for locations with repeat malicious activations (ALC22012 surface, ALC22002 recessed). A gasket option is available on any of them. Ask us for a model or part not listed here.\u003c\/p\u003e\n\u003ch3\u003ePlacement\u003c\/h3\u003e\n\u003cp\u003ePull station location, spacing, and inspection intervals are set by \u003ca href=\"https:\/\/usmadesupply.com\/resources\/building-codes-standards\/emergency-life-safety\/nfpa-72\"\u003eNFPA 72\u003c\/a\u003e and the local fire code. This cover is an accessory and is not a substitute for any requirement in that standard. Confirm the cover matches your pull station footprint before ordering.\u003c\/p\u003e","brand":"JL Industries","offers":[{"title":"Each","offer_id":47777371357361,"sku":"JL-22011","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/5269\/4961\/files\/0_2cd7b1d6-7d5f-4642-aa75-74f3d3e5091a.png?v=1785040864"},{"product_id":"cato-surface-mount-secured-fire-alarm-cover-break-bar-220-sb","title":"Surface Mount Secured Fire Alarm Cover Break Bar 220-SB","description":"\u003cp\u003eThe Cato ALC22012, previously catalogued as the 220-SB, is a secured surface mount cover for a manual fire alarm pull station. Where the standard pull-to-open cover lifts by hand, this one uses a grid-scored acrylic panel that has to be broken with the supplied break bar, so a casual pull will not reach the station. The body is vandal resistant and a side slot holds the break bar when it is not in use.\u003c\/p\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eThis is the version for locations with repeat malicious activations rather than accidental ones: schools, dormitories, correctional and behavioral-health facilities, and public transit areas. It raises the effort required to trip an alarm without hiding or obstructing the device. It does not change how the alarm system is designed, installed, or inspected.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eALC22012 (previously 220-SB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSecured cover for manual pull station\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAlarm mounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSurface mounted alarm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOpening method\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSecurity break bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCover inside (W×H×D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6-1\/2 in × 7-1\/2 in × 3-1\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCover outside (W×H×D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7-1\/2 in × 8-1\/4 in × 3-3\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBody material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInjection molded high-density polypropylene, red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePanel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.080 in clear acrylic, grid scored for emergency access\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBreak tool\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGalvanized steel break bar on nylon coated stainless cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDecals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUV resistant BREAK PANEL and FIRE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHandle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDesigned to ADA specifications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated options and parts\u003c\/h3\u003e\n\u003cp\u003eA recessed version of this secured cover is available (ALC22002, previously 220-RB), as is a standard pull-to-open cover in surface (ALC22011) and recessed (ALC22001). A gasket option is available on any of them, and replacement acrylic panels and break bars are stocked. Ask us for a model or part not listed here.\u003c\/p\u003e\n\u003ch3\u003ePlacement\u003c\/h3\u003e\n\u003cp\u003ePull station location, spacing, and inspection intervals are set by \u003ca href=\"https:\/\/usmadesupply.com\/resources\/building-codes-standards\/emergency-life-safety\/nfpa-72\"\u003eNFPA 72\u003c\/a\u003e and the local fire code. This cover is an accessory and is not a substitute for any requirement in that standard. Confirm the cover matches your pull station footprint before ordering.\u003c\/p\u003e","brand":"JL Industries","offers":[{"title":"Each","offer_id":47781889441969,"sku":"JL-22012","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0529\/5269\/4961\/files\/0_2add27e7-d99c-421d-bd89-ce3aa1014637.png?v=1785208011"}],"url":"https:\/\/shop.usmadesupply.com\/collections\/fire-alarm-protection.oembed","provider":"US Made Supply","version":"1.0","type":"link"}