The JL Industries Ambassador 1015W10 is a recessed steel fire extinguisher cabinet with a locking Saf-T-Lok door, made in the USA. The Saf-T-Lok is a keyed cylinder lock with a breakaway lexan cam: day to day the cabinet is locked against tampering and theft, and in an emergency a sharp pull on the door breaks or bends the plastic cam and opens the cabinet without a key. Two keys are included for routine access and inspections. The 3/8 in flat square trim sits nearly flush with the wall, and the vertical-duo clear acrylic door swings on a continuous hinge that opens 180 degrees.
Specifications
| Model | Ambassador 1015W10 |
| Mounting | Recessed, 3/8 in flat square trim |
| Lock | Saf-T-Lok cylinder lock, 2 keys, breakaway lexan cam for emergency access |
| Fits extinguisher | 2.5 to 10 lb (see compatibility below) |
| Tub interior (W×H×D) | 10-1/2 in × 24 in × 6 in |
| Trim, outside (W×H) | 13-7/8 in × 27-3/8 in |
| Rough wall opening (W×H×D) | 11-1/2 in × 25 in × 5-7/8 in |
| Material / finish | Cold-rolled steel, white powder coat |
| Door | Vertical-duo clear acrylic glazing, Saf-T-Lok, 180° continuous hinge |
| Fire rating | Non-rated |
| ADA | 3/8 in projection (within the 4 in limit); handle must mount 48 in or less above the floor; see installer note |
| Weight | 17 lb |
| Country of Origin | USA |
Where a locking cabinet makes sense
Any wall where extinguishers get tampered with or taken between inspections. The point of the Saf-T-Lok design is that the lock never blocks emergency access: the cabinet only appears fully locked, and a sharp pull breaks the sacrificial cam. The lexan cam is replaceable, so after an opening the lock goes back in service with a new cam.
Installer note
On Saf-T-Lok door styles the pull sits 3-1/2 in higher than the door center; allow for that against the 48 in maximum handle height when setting the cabinet's mounting height.
Extinguisher compatibility
JL's fit matrix rates this tub for standard 2.5 to 10 lb dry-chemical extinguishers, with wider-bodied clean-agent units to 5 lb and 5 lb CO2. Fit is set by the extinguisher's cylinder diameter against this cabinet's 6 in interior (tub) depth, not by weight. Confirm the cylinder diameter on your extinguisher's cut sheet against the tub depth above. See our Fire Extinguisher Cabinet Selection Guide for the full fit matrix.
Placement and mounting height follow the NFPA 10 requirements.
Model cross-reference
The same cabinet without the lock, on a plain pull handle and roller catch, is the 1015V10. The Saf-T-Lok door is available across the Ambassador family (G full view, W vertical duo, E horizontal duo, L22 solid), in other trims (1016, 1017; we carry both in the pull-handle door), and as a factory option on made-to-order builds including fire-rated FX2 versions. For an exact configuration, request a quote from this page.
Documents and downloads
For specification and installation: the manufacturer's Ambassador series submittal (PDF). Need a project-specific submittal filled out? Send us the project details with a quote request.